Questions & Answers for: Ford distributor

...ignition module on 1994 full size ford bronco? Its not to hard..part is about $ 50 Remove the distributor cap from the distributor, and set it aside (spark plug wires still connected). ...

...not a super charger. firing order 1-4-2-5-3-6 Insert each ignition wire on proper terminal of distributor cap . Ensure ignition wires are properly seated on the terminals. The No. 1 terminal is ...

...engines: Thick Film Ignition IV (TFI-IV) System Disconnect the negative battery cable. Remove the distributor from the engine. Place the distributor assembly on a workbench. Remove the two TFI ...

how to replace a distributor on a 1984 F150 with a 4.9L 300 L6? Remove the cap. Mark the position of the distributor to the engine and mark the position of the rotor to the distributor. Unplug the ...

Not sure how to replce spark plug wires from the distributor need help please send info change one spark wire at a time on the distributor.buy new set of spark plugs wires remove them from box.match ...

how do I repalce ignition module on 1991 F150 inline 6 cylinder 2 wheel drive Remove the distributor cap from the distributor, and set it aside (spark plug wires still connected). Disconnect the ...

How to install a distributor in a 93 mustang gt Removal; Rotate the engine until the No. 1 piston is on top dead center of its compression stroke.Remove The distributor cap and then mark where the ...

i have a 1996 f 250 has a 460 engine in it,i replaced the distributor how do i reset timing on it You should have marked the distributor prior to removal, but if not , no problem. First make sure the ...

...of wires Whenever a high tension wire is removed for any reason from a spark plug, coil or distributor cap, or a new high tension wire is installed, Silicone Dielectric Compound WA-10, ...

How to install a Distributor install on a 1988 Ford ranger 2.3 Need a pic First bring the engine up to top dead center and compression stroke confirmed on No 1 cylinder. Next remove distributor cap ...