Questions & Answers for: Sony display clock

...clock display disappear. To change the display Press DISPLAY on the remote repeatedly while the system is off. Each time you press the button, the display changes cyclically as follows: Demonstration ...

...to set the hour and minute. 5: Press the select button. The setup is complete and the clock starts. To display the clock, press DSPL button. Pres DSPL button again to return to the previous

...to set the hour and minute. Press select and the clock will start and the next setup display appears. Then press and hold select to finish. To display clock press the display button. Hope this ...

...Press the select button. The setup is complete and the clock starts. To display the clock, press (DSPL). Press (DSPL) again to return to previous display. The clock uses a 12-hour digital

-/+) 5.) Press the SELECT button. (The setup is complete and the clock starts.) To display the clock, press DSPL. Press DSPL again to return to the previous display. If this helps, please leave rating

display clock on our Sony Bravia LCD Digital TV KDL-40V4000 How can we keep the digital clock displayed on the screen? It was displayed until someone fiddled and we no longer have it displayed. We can

...that automatic DST adjustment is canceled.Then the display returns to the clock. If you have not manual and you want it can be downloaded: http://www.docs.sony.com/release/ICFC318_US.pdf Thanks. ...

...clock radio is plugged in and switched on. The time display shows a flashing 12.00 AM and a caption below shows "setting time" which it should do automatically according to the manual. However, the ...

...DISPLAY. The clock is then displayed for about 8 seconds. The full support section with manual downloads is available here for further help and ...

display. 3 Press CLOCK . 4 Repeat steps 2 and 3 to set the month, day and time. After setting the time, two short beeps sound and the clock starts from 0 seconds. ? Pressing and holding + or - changes