Questions & Answers for: Bosch display clock

...clock display to set time. What do we need to try or do? I have tried every thing I know from shutting off to entering clock time etc. It may possibly be locked, in which case holding the enter/start ...

...Clock time display can be turned off. The default display is on. 1. Access SELECT FUNCTIONS Menu. 2. Turn knob clockwise until CLOCK DISPLAY is displayed. 3. Press START. 4. Turn knob to select ON or ...

...CLOCK TO DISPLAY HI, FOR SOME REASON, THE CLOCK STOPPED DISPLAYING THE TIME. THE UNIT JUST READS OFF. I CAN GET TO THE POINT OF SETTING THE TIME BUT IT WON'T SHOW NUMBERS TO BE SET. I HAVE HAD THE ...

display of the clock is malfunctioning. it skips numbers and is not keeping time. The clock gives random digits when you turn the knob. The oven temperature only goes from 358 and then if you continue

...display will change in one-minute increments. e). Touch TIME pad. The clock is now set. in some units there is button instead of knob in that case the clock indicating button has to be pressed . This ...

...clock display microwave problem only oven works fine Bosch microwave combination Type HBC84K5.0B Built into a tower Error Code: E8 Cause: Control Board Example: Remains in display; oven unusable ...

...clock icon on the display illuminates. Please note: There are 4 illuminated icons on the display above the time. There are 3 which have clocks on them. You need to make sure the 4th icon (on the far ...

display should flash 0.00 or 12.00. Press the clock button once ( don't hold it in) use the + or - to set time. Once time selected don't press anything else after a few secs the oven will register and

START RESET" key until the display clock shows "0:01". Close the door and rest about 60 seconds. On the SHE5AM, wait until the display clock displays "0:00". Open the door and hold the "ON/OFF" toggle

...display flickers often. Other times the clock is displayed as usual. What does this mean? first thing I would do is check the cables that go to the clock, if they are OK then you likely have a faulty ...