Questions & Answers for: Timex display button

...button. The display should go off. Hit the sounds alarm button. The display should also go off. This is what it did and it worked for me. Too danged simple to be real--and NOT in the instructions ...

...Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will ...

...display. The "START/SPLIT" button could be located below the watch face or on the upper-right side of the watch, depending on the model. Press the "SET" button again. You are now done. All PM hours ...

...Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten seconds of pressing the it, the display will stop flashing andd you will need ...

...Button until the display begins flashing.2. Press the 10 Reverse or 14 Forward Button to set the time. Holding a button for a few seconds will advance or reverse the time rapidly. Set the correct ...

Button until the display begins flashing 2. Press the Reverse or Forward Button to set the time. Holding a button for a few seconds will advance or reverse the time rapidly. Set the correct AM/PM time

...button until the display briefly shows'OFF' and then reverts to the time.1. Press and hold the ALM 1 button until the Alarm 1 time and the Alarm 1 Buzzer indicator begin flashing in the display, then ...

...button until the display briefly shows 'OFF' and then reverts to the time. 1. If the display is flashing, press the HOUR / REV button to advance the display to the correct hour. If the display is not ...

...button), the display should start flashing. While the display is flashing, press the Tun + (Hour) button, next to the Power/Mode button, to advance the hour to the current hour. Then press the Tun - ...

...display flashing. Press the same button again to go to minutes and them again to go to the date display. Repeated pressing of the top Right SIDE button changes the numbers upwards, (1,2,3,4), and the ...