Questions & Answers for: Suzuki display button

...display" button. My car does not have a display button. Hold the arrows on the bottom right hand side until you hear a beep. The one on the left is for the hours and the right is the minutes. I tried ...

...display will flash adjust the hour by pushing the right button.. push the right button again and the minute will flash, button on the right will change the number. push button on the right to resume ...

...button but on others it switches the display from miles travelled to a display where you can see how many miles your single journey is, tried replacing the wires on mine but still does nothing. Hope ...

...display by pushing button 6 NB when button 6 is held down the display advances continuously, "Push button 5 to highlight the minuite display. "adjust the minute display by pausing button 6 "when you ...

...the following instructions that reset mine today. 1. Press information button until 'oil life' is displayed. 2. Tap check mark two times and hold it on the third tap. Good luck!! what did you do to ...

display button(i) and the display will read 0% oil life. 3. Hit reset button (the check mark button) for 5 seconds and the display will change to 100 % oil life. 4. It may not work the 1st,2nd,3rd ...

hour, minute, set, display buttons do not work Started car, noticed that the time was wrong, couldn't reset, also the temp display had changed to far. from celcius couldn't reset also can't change the

...display blinks,adjust hour display by pushing adjust button,push the select button to highlight the minute display , use the adjust button set your minutes , press select button to resume clock ...

...button down at the same time AND HOLD IT THERE FOR 30 - 60 MINUTES. The radio display will eventually flash CODE ---- This is an invitation to enter a new code. I entered 1111. And bingo the radio ...

button on the stereo until the time display begins to flash. Use the "SEEK" or "TUNE" buttons to adjust the hour. Press the "SEL" button again to switch to the minutes display. Use the "SEEK" or "TUNE