...an unused UHF channel number that your set does have in its up/down list. Match Air/Cable setting of Dish and TV. The Dish output is analog (NTSC) although the tuner(s) only accept digital (ATSC). ...
Question about AQUOS LC46LE700 46 in. LCD HDTV
...Dish Network My tv is connected to Dish Network. Instead of changing the channel on the Dish remote, I used the "Channel Up" arrow on the Sharp remote. I now have snow on the screen and can't find my ...
...TV which has no problem receiving the standard DISH signal. I hooked up the OTA antenna cable to the back of the 301--what do I need to do next? You shouldn't need to. You should get your local ...
...DISH Networkreceiver. Go to the main TV by the receiver, press the menu button located onthe top left of your DISH remote. Once in the main menu, press the numbers6-1-5, this will take you to the ...
...dish tv will work, it seems the highest channel tv set will go is 69 We would be happy to help with that. Some TV's do not havethe ability to go as high as channel 73; this may be the case for your ...
...3 or 4, that is normally the channel that the tv needs to be on. Also, make sure that the DVD player is not on while you are trying to watch just the dish. Becki Barned DISH Network Customer ...
...tv have to be on - I have dish network - do I leave the dish off or on and move it to a certain channel? First check what channel or input your TV is currently on bypowering the TV off then back on ...
...DISH receiver to the TV. If you are currently using a Coax cable the TV needs to be on channel 3 or 4 in order to get a pic, if you are using RCA cables it will need to be an Input. To change inputs ...
dish TV. Channels are missing. Channel # 906 after that it goes to # 914 then # 920.... Even if I enter manually in the remote "908" the channel is not displayed. Contact the service provider to Dish.
Question about Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500
...Dish tv screen but cannot change stations separately on both tvs Each TV receiver has to be fed with a separate cable from the lnb. They can not be bridges or split. TV 2 (the location with no ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
