DISH DVR 625. How do I individually assign tv1 and tv2 for recording You can accomplish this by either going to the specific TV and selecting the record option at the time the program is about to come
...tv2 works fine,,,and this goes on n on...any ideas......phone cant figure it out One of the inputs on the back of the 322 box is bad. usaly 1 wire runs from the dish into a seperator that splits the ...
...TV1, and the remote for TV2 worked for for TV2. Now it doesn't. What am I doing wrong? Your shared view is enabled. , press the menu button, then option 6 then option 2, disable shared view then ...
...Dish Network customer service. The first thing I would do is try unplugging the reciever for ten seconds, then plugging it back in. If that doesnt do the trick, make sure the tv is on ch 60 or 73. If ...
Question about IS-LCDTV32 32 in. Television
dish network. It won't accept channel input either! Hello! If your tv just won't cycle to the correct channel you can change the setting if its tv1 you need a channel scan if it's tv2 try these steps:
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
DISH Network here. The default setting in our receivers are to automatically record everything onto TV2. You can change the setting by pressing menu-8- 5 (preferences-record plus), then you can either
...DISH Network and I was going over yourpost and with TV2 showing what's on TV1 you want to make sure the receiver isin dual mode and if that is the case please unplug the receiver for 10 secondsto ...
...DISH Network and I see your TV2 changes TV1 as well, thereis an easy fix to this problem. You will want to make sure the receiver is inDual Mode and then make sure the TV2 connection on the back of ...
Question about Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500
...for TV1 and TV2 are being sent. Go to TV2, and with the tv remote (not the DISH remote) change the channel to the one shown on the screen (usually channel 60 or 73). Then dance because you fixed
Question about Dish Network Dish 500 Antenna Satellite Package with Pansat 4500 FTA Reciever - D4500
...dish network hard drive went out on old receiver they sent new one hooked it back up tv1 works tv2 is snowy receiver is on dual mode. But still cannot get tv2 to work. What setting should tv1 and tv2 ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions