Question about PIXMA MP160 All-In-One InkJet Printer
...also replaced but this is OK. Indicators not lit and prints came out good. What is the problem, please? Sounds like the print head is dirty take some rubbing alcohol and qtip and clean the print
Question about PIXMA MP160 All-In-One InkJet Printer
...prints not alligned and dirty my canon mp160 doesnt print well, the prints disalligned and blurd, i tried almost half a day performing a cleaning using the maintenance tools of the said printer.but ...
...after I installed a new "yellow" cartridge, my printer started printing streaks. Except for the dirty marks, which done't seems to have the same pattern on each page, the print quality is ...
say's the ink try is dirty so won't print My printer won't work say's the ink try is dirty Hi lovely michelle, Are you sure this message appears in your computer?. I never heard such message in my ...
paper won't feed Inside of the machine is dirty. If the inside of the machine is dirty, the printed paper may be smudged. Follow the steps described below to clean the inside of the machine. 1. Ensure
...sure that the printer ink was not empty. On some cases the print head could be clogged or it was dirty, run a printer maintenance and do a deep cleaning on the printer print head. Hope this
Question about Pixma MP500 All-In-One InkJet Printer
...page comes out with a black streak down the middle of the back of document Hello it sound like a dirty printing head. Run it through cleaning on your unit. If that doesn't work, then maybe it's a ...
...could cause this. One is not printing at a high enough setting, the paper not being compatible or dirty print heads. Check your print setting for resolution and sharpness. Paper even photo paper
Question about PIXMA MP830 All-In-One InkJet Printer
...be printing but nothing on page Let me lay down the possiable reason: Blocked nozzel bad print head dirty print head dried ink in cart. OK I laid down some issues aboce invistgate them all and let me ...
The printing is blurred nothing so far what should I do ? Blurred print may be caused by a dirty print-head - remove and wash with clean warm water. Dry with paper towel and retry. Blurred print may ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions