Question about MultiPASS MP700 All-In-One InkJet Printer
...a text page, all black printing comes out splotchy. The printing looks like a print head is dirty, but after cleaning multiple times and re-aligned, etc., NOTHING has helped. I have the same ...
Dirty smudges when printing My Canon D680 lately has been printing dirty with ink smeared lightly all over, looks like there is a ghost image of the top section printed at the bottom try to go to the ...
paper comes out dirty Hi! congratulations for the web. My printer is working perfectly but when the printed paper comes out is has 2 lines of ink. I think the roll is dirty but I don't know how to ...
say's the ink try is dirty so won't print My printer won't work say's the ink try is dirty Hi lovely michelle, Are you sure this message appears in your computer?. I never heard such message in my ...
dirty print - dark streaks across top of document Check the PC drum,if dirty clean.Has toner spilled from the I/C inside of the copier?Clean.Is the PC drum charge voltage terminal in good ...
Prints have lines throughout Sounds like the printer head is dirty and needs to be cleaned. If after removing the ink cartridge and cleaning the print head with DENATURED ALCOHOL NOT RUBBING ALCOHOL, ...
...could cause this. One is not printing at a high enough setting, the paper not being compatible or dirty print heads. Check your print setting for resolution and sharpness. Paper even photo paper
Question about iR 2016i Black and White Copier
the print out r my xerox copier everytime we used it the print copy is dirty.how can i solve these kind of problem?hope you can help.thanks The developing tank need,s also a periodical maintenance ( ...
The printing is blurred nothing so far what should I do ? Blurred print may be caused by a dirty print-head - remove and wash with clean warm water. Dry with paper towel and retry. Blurred print may ...
Question about IR 4570 COPIER FOR 220 VOLTS ONLY
...print is light how to solve This problem may be caused by several different issues. It may be a dirty laser unit, a bad developing unit or a dirty or bad CCD unit. All of these will require an ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions