...Dirty paper feed rollers, clean rubber rollers with slightly damp rag ....No....... Paper/tray not installed correctly or sticking / dirty paper out sensor Sorry cant help further cant picture model ...
...any jammed paper Regards, Will The Paper Jam issue can be caused due to using dirty or twisted paper, wrong size of paper, dirty paper tray and more. Follow steps to fix paper jam in printer
Question about SF-5100 Plain Paper Laser Fax
...can't feed paper. how can i fix it? check the rolers they may be dirty with paper dust, or you paper is damp if its no dirt,you must replace seperation unit and pickup roler or the sencors are ...
...roller. If it's clean it could be a dirty paper path or fuser. Vacuum out the printer, if you have mounds of toner laying in the paper path, everything that comes out of the printer will be
...paper does not feed straight, dirty or stickyrollers can cause it to jamb or crinkle, also failure to remove all traces ofpaper from a previous paper jamb will cause further paper jambs. The rollers ...
Question about 922 All-In-One InkJet Printer
...pieces of at the edges of the rollers, and remove these piecesof paper. The rollers may be dirty or sticky and causes the paper tonot feed straight. Try cleaning the rollers with methylated
...pieces of at the edges of the rollers, and remove these piecesof paper. The rollers may be dirty or sticky and causes the paper tonot feed straight. Try cleaning the rollers with methylated
Question about Pixma iP2600 InkJet Photo Printer
...pieces of at the edges of the rollers, and remove these pieces of paper. The rollers may be dirty or sticky and causes the paper to not feed straight. Try cleaning the rollers with methylated
...pieces of at the edges of the rollers, and remove these pieces of paper. The rollers may be dirty or sticky and causes the paper to not feed straight. Try cleaning the rollers with methylated
...pieces of at the edges of the rollers, and remove these pieces of paper. The rollers may be dirty or sticky and causes the paper to not feed straight. Try cleaning the rollers with methylated
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions