Questions & Answers for: Intex dirty filter

filter is putting out dirty water, and i have just replace the filter make sure the filter is seated properly and all the seals/o-rings are in place. Look for any potential area that dirt/debris would

Krystal clear saltwater system. Low water flow is generally and indication that the filter is dirty / clogged. Remove the filter cartridge and see if the light goes out. Replace the filter if required

filter doesnt even get dirty and water seems to go in dirty and come right back out dirty. we shocked the water and have 2 floaters with tablets and in one week it turned green like we arent filtering

low flow First, check you filter, may be dirty and needs cleaning. Or check flow sensor, may be stuck, dirty or broken.. See picture...

filter gets a little dirty it stops because when I put in a new one it pumps strong for awhile than quits again but if I take filter out it pumps very strong. I don't know what to do but I do know

...dirty filter is not the issue. Any ideas? Many thanks! Anna It is likely that your filter is dirty. The filter's cartridge can be removed and cleaned with a spray nozzle on a hose. you will then ...

low water flow filter dirty?

...if there is something clogging it up, where to I check this out. check impeller for clog or filters ...

help low flow (90) no air in pump nothin in filter at skimmer and wall? dirty filters

...filter system, if dirty..., you may have a broken underground line. Check water clarity coming out of filter system, if dirty.., backwash again and check filter media. Also, Heater boiler headers may ...