Questions & Answers for: Brother dirty drum

drum and the copies are coming out really "dirty" looking. do I need to chage the toner too? The sign of a low toner is bizarrely enough, a very dirty print out covering who page. I dont know but when

...dirty white sheet. I have replaced the toner cart even though the light does not indicate toner is low. I have not tried to change the drum since it does not indicate drum is bad and drums cost too ...

...dirty..but I do not see how to clean it. I assume it is inside the drum? If not, I do not see how the drum might be exposed to the laser as nothing appears openable on the drum case. The corona wire ...

...drum replacement in many cases !! On brother intellifax or MFC, keep in mind that either the fax/copy scan window OR the laser scan window can get dirty. If the fax scan window is dirty, you see ...

...I have an HL-2070N laser and the pages are coming out dirty looking. How can I tell if it is a drum or the cartridge problem? try a toner cartridge first .. if problem is still there then its the ...

dirty gray background. What is best way to clean a Brother HL1440 laser printer? The toner drum/cartridge was dropped when last changed and I am sure the toner contents were spilled. remove drum assy.

dirty. Clean your primary corona wire (see pages 13-18), or ask the sender to make a copy to see if the problem is with the sending machine. Cleaning the Drum Unit We recommend you place the drum unit

...appear through the entire length of the page vertically Hi this problem caused from dirty drums or bad one just you can clean drums, toner drum and printer drum. and you can try to change the ...

...drum cylinder is dirty and needs to be cleaned with alcohol and a cotton ball. Toner can build up on the drum cylinder and also the cleaning brush inside the drum assembly. These would need to be ...

possible dirty drum Depending on the symptom, drum can be dirty or the tonner might have lost the active property