...tv, my picture jumping in all directions. After a few minutes picture is fine. With time it takes longer to get a clear picture. Thanks, Adam theres a bad capacitor off the sweep power supply or ...
...Direct TV or the dvd player. We have no other inputs in use. The picture seems to jump less with the dvd player. This TV was purchased 12/19/03. Is there any hope for this patient? Thanks in advance ...
direct tv said to throw the tv out; isn't there a bulb or something i can replace. there is no television repair shop listed in the phone book. I would need your model number in order to even begin to
...tv & Direct TV was on After resetting the power breaker, tv needs to be reset. Direct TV said the tv jumped its programming. Channel 3 is what is used for direct tv & is solid blue. Channel 2 and ...
Direct TV Hookup My cat walked on my RCA remote and changed settings. I have Direct TV and my screen only flashes Unusable Signal. I know a setting was changed - my Direct TV works upstairs. What are ...
Question about E44W46LCD 44" Rear Projection HDTV-Ready Television
? i have a samsung hdtv and direct tv is attached to it. and i can't get a better picture than 480 i when the tv is capable of 1080i. ? when i change the cable box higher its just blurry. what do i do
Question about 4032 40 in. HD-Ready LCD Television
...Direct TV remote and it would not turn off. Control switches on the tv itself do not work. Power - Channel - volume - etc nothing works. Have to pull power cord in order to shut it off. If, indeed ...
...Direct TV service, and are using HDMI connections...do you think its the set or the Direct TV feed..is there a way to find out? Try the Direct TV connected to the TV via component cables and see if ...
...tv lcd screen okay for a little while then jumping and lines goign down screen and then lines and bottom and top jumping - what is the issue please Are the lines different colors? Are they in the ...
...have direct tv the reciever seems to be working . the phillips 37pfl5322ds only 3 or maybe 4 years old Maybe its loose PCB connection of the board.Its better to resolder the cold solder of the
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions