Direct Drive turntable. It can have a lower supply issue, microprocessor(computer inside your technics) or the drive circuitry. This will not be easy to resolve, and will require professional service.
DIRECT DRIVE STEREO FULL AUTOMATIC. THE REPEAT,START/STOP SWITCH IS NOT WORKING PROPERLY IT WILL NOT STOP WHEN YOU ADJUST THE SLIDER- SWITCH TO START THEN BACK TO STOP IT STILL STAYS ON ! my audiobox,
...Direct Drive there's no belt to fall off. There is an electronic brake. Could your problem have something to do with the Reverse function? Check the L.E.D. Perhaps cycling it will help. USING THE ...
...**** Smith Electronics for under 30 dollars if they are direct drive then you could check the fuses if its not either of these you might have to replace the motors which is quite inexpensive ...
direct drive spinning to fast one of the turntables is spinning to fast and i cant seem to change the speed or stop and start it without having to switch the power off and on. can someone please help ...
...direct drive turntables is spinning to fast and cant seem to change the speed or stop and start it without having to power off and on, can someone please help! Also is there anywhere i might be able ...
Question about PT-1000 II Turntable
...direct drive turntable? The product is Technics Direct Drive Turntable SL-D202. I bought this from a local charity shop for around 20 and it was a good buy and it works brilliantly! Until, I started ...
Question about PT-1000 II Turntable
...that drags usually mean theres a misalignment in the tray that holds cd turntables that drag unless they are direct drive usually need there rubber drive tires replaced or a belt what ever it ...
direct drive. These usually have the problem of the rubber drive wheel gets hard and the turntable is slow. Just stopping is more likely a belt. It is possible the belt has simply come off and in that
Turntable keeps Stopping and starting like its stuck This sounds like it might be a direct drive turntable. Whatever it is it seems there is something wrong with the motor control circuit.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions