Questions & Answers for: dimples

...you are trying to fit a belt you need to line up the crank pulley dimple and the camshaft sprocket dimples. The flywheel dimple is advanced about 5°. This pic shows the dimple and the line is the ...

B & S 675 series engine timing question I have a Snapper 2550 psi pressure washer with a Briggs & Stratton 675 series engine. The engine quit and upon investigation I found the timing gear on ...

...old timing gear for a new one. How do I set the timing gear? have the cam gear and the crank gear dimples facing one another. The crank gear has the dimple facing straight up and the cam gear

...above letters there should be a mark on one of the teeth line it straight up with the coorsponding dimples in the black steel cover behind ...

I own a camaro 1996 v8 5.7,I took out the timing chain for some repairs.Does the crunck sproket dimple and the camshaft sproket dimple have to face each other?Thank you for your time,Steve Malta. yes

aligning timing marks and how to check if its rite other than just the marks cam gear dimple down & crank gears dimple up 6 o'clock & 12 o'clock respectively

Why do I get a series of dimples on the printout? The dimples (indentations in the paper) are colorless, about 3.1 inches apart and 1.5 inches from the right. I have cleaned the entrance rollers etc ...

...if bolt and j-nut must slide j-nuts into slots then line up and install, if pointed bolts there are dimples that can be seen in bumper install at dimples, if no dimples just line up and install. You ...

190CC, 8.75 hp. how do I set cam shaft timing? What brand of motor? Briggs has a dimple on the cam and has a timing gear ring on the crank. I position ny piston to TDC of, well, it doesnt matter. ...

where to find the crank cam timing marks? each gear will have a dimple in them. The cam gear dimple will be at the 6 o'clock position and the crank gear dimple will be at the 12 o'clock position when ...