Questions & Answers for: dimage dual scan iv blinking

Question about Dimage Scan Dual IV Film Scanner

The Scan Dual IV will not initialize on startup although the door is closed.

...Scan Dual IV will not initialize on startup although the door is closed. I have used the scanner before, and had put it away for probably six months or better. Upon hooking it up again, I cannot use ...

Question about Konica/Minolta Dimage Dual IV Film Scanner

1 Answer

Dimage scan dual iv

dimage scan dual iv I was scanning color negatives with my dimage and one of my negative strips was too long for the negative holder. It kept the end of the holder open a little. The batch scan did ...

Question about Dimage Scan Dual IV Film Scanner

3 Answers

2nd Request for Dimage Scan Dual IV Sharing error

...Dimage", "dual", "Konica", "Minolta", "scan" and "idh". The idh things are some kind of plug-ins (I think). I warn you, all of these words brought up random stuff that should not be deleted (mostly ...

Question about Dimage Scan Dual IV Film Scanner

2 Answers

Konica Minolta Dimage Dual IV

Dimage Dual IV I moveded to Windows Vista and my scanner does not work any more. I have red that there is not an appropriate driver for Vista. The only way I have is to discontinue my sceanner and buy

Question about Dimage Scan Dual IV Film Scanner

1 Answer

DS_Dual4easy software for VISTA operating system?

...Dual IV and click on driver tab. Select Update Driver. 10. Select Browse my computer for driver software. 11. Select Let me pick from a list of device drivers on my computer. 12. Select Have Disk 13. ...

Question about Konica - Minolta DiMAGE Scan Elite 5400, 35mm Slide & Film Scanner - Refurbished By Minolta USA

2 Answers

Connection problem (error4 ) Minolta Dimage 5400

...DImage Scanner into a USB port and turn it on with the door closed. It will detect and install the original Konica Minolta Driver. 3) Create an empty folder on you harddrive (for instance go to my ...

Question about Dimage Scan Dual IV Film Scanner

4 Answers

I am attempting to use my Dimage Scan Dual 4, with

Dimage Scan Dual 4, with windows 7, but I receive an error 4 message, stating that the scanner connection cannot be confirmed. Any ideas? Ron 1) Install the Konica Minolta XP software in Vista/Windows

Question about Dimage Scan Dual III Film Scanner

1 Answer

Need drivers for Minolta Dimage Scan Dual III to

...Dimage Scan Dual III to work with Windows 7 64-bits I used this solution from KainAnderson 1) Install the Konica Minolta XP software in Win 7. 2) Plug in your DImage Scanner into a USB port and turn ...

Question about Dimage Scan Elite 5400 Film Scanner

1 Answer

Will this scanner work on Vista or must I use in

Question about Dimage Scan Dual IV Film Scanner

2 Answers

Using my Dimage Scan Dual 4 SW with Windows 7 gives me trouble. Have konica Minolta SW ver. 1.0.0 for windows XP. It works fine on the XP computer. But I have great difficulties loading the SW on

...Dimage Scan Dual 4 SW with Windows 7 gives me trouble. Have konica Minolta SW ver. 1.0.0 for windows XP. It works fine on the XP computer. But I have great difficulties loading the SW on I have tried ...