Question about XL-2100U Projector Lamp for KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR95
...negative. Unit has always been on a UPS/Surge [email protected] Sound but no picture, tv will not turn off. Light goes red but a dim overall blue screen remains and fan is still
Question about XL-2100U Projector Lamp for KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR95
...lt2200 projector If the picture is dim with no distortion then replace the lamp.Usually when the lamp is used for around 2 years it starts to have dim picture before it stops working or breaks
Question about LP120 / 1000 Lumens / XGA / DLP Projector Refurbished Multimedia Projector
image is dim. How do I adjust brightness You can adjust the brightness through the user menu, under the picture option. You might want to look at your bulb. It might be time to replace the lamp.
...Dim Picture on Sony KP-61s70 I have had a Sony KP-61S70- rear projection since 2001, (approx. 9 years) The picture is getting dim and hard to see especially in day light. Do I need a new lamp and how ...
Question about WD-52327 52" Rear Projection HDTV-Ready Television
...picture", no on "screen menu", there is good sound, no light of any kind comes out from the projectors, though I can see there is a dim light at the end of the projectors guns, right where is ...
Question about LC-SB20 Projector Multimedia Projector
Everything works fine, just going dark on me! Going "dim". Is it typically the lamp? Yes, anytime the picture becomes dim, or the color begins to fade it is time to replace the lamp.
Picture went dim, new bulb installed still dim. before installation of a new lamp your projector need a service due to dust your LCDs and analysis block not pass on the light properly and now you get ...
...picture quality became very dark. Now wont stay on for very long...will switch off after about 10 mins of viewing. Unfortunately dim image and premature shut-off are normally due to a defective lamp ...
Picture way too dark to watch comfortably. Have already adjust all settings to maximize brightness. Bulb was replaced late last year and says 1,000 hours have been used but projector has not prompted ...
Question about PRM20
picture is very dim. even with a new bulb. Out of warrenty. Thanks We have completly took the projector apart. a mirror was cracked but thats not the problem. Maybe like of power some were? any ideas?
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions