Questions & Answers for: Uniden no dial tone on phone

...dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for ...

dial tone Did you plug in another phone to see if there is dial tone. Then if not call the phone company or find the D-mark (where your dial tone ) comes into your home and put a jack on that and plug

dial tone. I cannot get a dial tone. The number shows up, the word talk shows. Can't answer or make a call. Hi peddler65, did you plug your phone into another area to see if there is a dial tone. Then

Dial Tone but won't call out. We have a dial tone, but when we start to dial a number, nothing happens. The dial tone continues as if the phone doesn't send the numbers through. We have a dial tone ...

...tone off. I had done that but it will not dial out using pulse. I think this phone might not support pulse since on the menu option it only has tone on or off. What can I do? Thanks The Vetech phone ...

dial tone-installed new battery still no tone No dial tone on above phone on two hand sets i can not get a dial tone.. That isn't a whole lot to work with. Get a working phone and take the cord out of

...Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method ...

...dial tone. First be sure you have dial tone at the jack. Use a corded phone to do this with. If you do have dial tone then be sure you have ac at the outlet that the transformer is plugged in to. If ...

...tone to dial tone. I can't seem to that switched either. Resetting the voice message waiting indicator When you receive a new voice mail message, the new message LED on the top of the handset ...

...phone is pre-set for touch-tone use. To set to tone or pulse dialing: 1. Press and hold the program button until you hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to ...