Questions & Answers for: GE no dial tone

Question about 27990GE3 Cordless Phone

2 Answers

...tone. Ie. I hear the pulses and not tones when I dial. I don't have a manual either. Help!!!! Thanks, Mike yea.. this happeneded to me aswell.. here's what you do: (this is in the manual btw) ...

Ad

Question about 25831GE3 Cordless Phone

1 Answer

dial tone, but cannot dial out on either of the pair of cordless phones. The dial tone never ceases even while I am attempting to dial out. I have an external answering machine on the same line and it

Ad

Question about GEH5450 Cordless Phone

1 Answer

...appreciate some assisstance sooner than later if possible. In General Electric (GE): TONE/PULSE DIALING To set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You ...

Question about GEH5450 Cordless Phone

2 Answers

...menu comes up and you can press * for tone or # for pulse. Hope it helps! in GE models: TONE/PULSE DIALING To set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You ...

Question about 26998GE1 Cordless Phone

2 Answers

...dial tone i tried to call but there is no dial tone Have you tried a known good phone in the jack, if that doesn't work take the phone to the demarc box provided by your phone company and open the ...

Question about Cordless Phone 900 MHz

1 Answer

...Dial tone is OK, but can't dial out ? Make sure the tone/pulse setting is programmed correctly. TONE/PULSE DIALING 1. Make sure the phone is OFF (not in TALK mode). 2. Use the CID/VOL left (-) or ...

Question about 28112 Trio Cordless Phone

1 Answer

...dial tone all 3 phones says no range, and I can not access my answering machine, none of the buttons work. The letters LL flash on the answering machine. I have no dial tone on my phones. I can ...

Question about 25932 Cordless Phone

1 Answer

...dial tone I have a Non -GE combination telephone and answering machine connected online in the kitchen. I have a GE #25932 connected to the same line in my Bedroom. I was receiving a dial tone and a ...

...dial tone says unavalibel cant get one of the three phone to get dial tone only the main base one. All you have to do is put the phone that does not get a dial tone on the MAIN CHARGING BASE for 20 ...

...dial tone Remove all the phones on the system. Remove all the handset batteries. Plug in one old style corded phone to the main phone jack, it is normally the one closest to the front door. Do you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GE Lands Phone Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...