Questions & Answers for: no dial tone

...dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for ...


Dial Tone - Number Dialed does not go through We have the base with two additional handsets. We pick up the handset, have a dial tone and dial the number. It will not go through. Doesn't seem to ...


Question about Aspire One PC Notebook

1 Answer

...dial tone laptop will not detect a dial tone, but the desk top modem will, with the same phone line. what could be the problem? Hello Mikenrgrsvll This problem can be due to the software not handling ...

Question about 2.4 GHz Cordless Phone System

2 Answers

...Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method ...

Question about 2.4 GHz Cordless Phone System

1 Answer

...dial tone connected vtech CS6229-3 but get no dial tone - waited till batteries were fully charged, still no dial tone - reconnected the old phone & now no dial tone there either (worked fine ...

Question about KX-T7730 Corded Phone

1 Answer

dial tone on speaker-phone but no dial tone on line 1 Either button mapping or no dial tone at the system cabinet. If your desplay sas CO1 and you have no dial tone, go to the sytsem cabinet ans swap ...

Question about Cordless Phone

2 Answers

I have a GE 900mhzcordless phone and no longer have the book and I need to program to pulse dialing. The Model # 26928ge2-b I hope you can help. You can download the manual at ...

dial tone? And have you tried another phone? If there is a dial tone make sure the phone is set for tone dialing. There will either be a switch on the side of phone for pulse or tone, set for tone. or

...dial tone but I can't call out, as dial tone continues-do I need a new phone? Look on the side of the phone for a slide switch for Tone and Pulse dialling. You need Tone. Difference Between Tone ...

...dial out on pulse on one line, works on second line try changing phone to tone dialing . one phone line has been setup for Decadic dialing and the other line may be setup for tone dialing. If tone ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers


Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides