Questions & Answers for: EnGenius dhcp settings

...wireless routers subnet and not already used in your indoor wireless router's subnet and disable DHCP on the EOC-3220 and allow your indoor network to control DHCP for the outdoor segment. From ...

...ok then changed the setting to AP. I then got page 192.168.1.2 ok I then changed the fixed IP to DHCP and said apply. I now can't get back to any page on the EOC-3220 EXT my laptop says it is ...

...and then "ipconfig /renew". You will be reassigned an IP address, which (depending on how your DHCP server is set up and how big your network is) may or may not be the same IP address you had ...

...fails to get an IP address from the AP - how do I fix? It sounds like your AP is not set up to be a DHCP server. If you want to use devices with your AP that expect to receive addresses over DHCP, ...

...IP to 192.168.1.2 it connects, but not if I set "Obtain IP automatically" You need to enable the DHCP server on the EOC-2611P. Then it will negotiate an IP address with your PC without you having ...

...manual out there Thanks for your help..... Assigning an IP address to a computer is a function of DHCP. Either the access point's DHCP server much be enabled, or a DHCP server somewhere on the ...

...I've gone through the configuration wizard, set the router and connection up to connect via dhcp but get no connectivity First We need yuor OS and reuter Brand? Then waht type of issue? Poast ...

...manual and settings several times and don't know what the problem is. Try to use dhcp only from primary router - modem. For the repeater disable dhcp. Ip's let auto. if i was helpful please

...directly via ethernet cable? If you hare directly connected and you have your router set to enable DHCP, you should get an IP address. I assume you are familiar with networking enough since you know ...

...to router via web browser and verify DHCP settings is set to client. Then very Attain DNS Automatically is set. You manual has ...