Questions & Answers for: IBM dhcp scope

DNS Suffix : xxxxx.xxxx.com Description: Brand and type of NIC Physical Address : xx-xx-xx-xx-xx-xx DHCP Enabled: yes or no AutoConfiguration Enabled: yes or no IP Address: xxx.xxx.xxx.xxx Subnet mask

...IP address configuration or it does not saving the configuration in static mode but when i using DHCP it's work and no problem, so, when i put Static IP, my Network Icon on my Desktop tray starts ...

...printer to a new locaiton in the bldg. It now will be getting a new ip address. I have enabled DHCP. How do I get the printer to pull a new ip address automatically with DHCP. I have tried ...

connect can not connect to internet Try checking your network configurations. Set it to automatically obtain network address of your using DHCP.

...DHCP scope to 192.168.1.2 - 192.168.1.249 we'll reserve 192.168.1.250 for your copier/printer Telnet into your copier/printer At a command prompt enter the following command: telnet 195.195.195.x ...

...Tricky one. Sorry you will not like this answer: Per IBM quick setup guide If your network is using DHCP, an IP address is automatically assigned after you connect the network cable to the printer. 1 ...

The booting-up sequence stops at "DHCP loading" for about 1 minute then the display on the monitor switches to a simple animation illustrating a floppy disk being installed. I guess that the disk ...

then turn it back on again. Zahc maybe your rounter has problem? or you have a static IP instead of DHCP

...to OFF Connecting printer in network: Now you can connect printer with network cable, make sure DHCP works in your network. Switch power button to ON. Printer initialization should also obtain IP ...

...Intel base then copy right (c) 1997-2002, then the Client Mac Address & then PXE-E51: No DHCP or proxy DHCP offers were received.then PXE-MOF: Exiting Intel Boot Agent. Operating System