Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
...xrp hammer drill driver I am having trouble changing speed settings. It gets progressively harder to turn as I go to higher settings. Getting to hammer mode requires a pair of channel locks. run the ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
i think its a bad chuck unsure though when u hold the chuck it makes a grinding sound and it doesnt lock tight it keeps spinning yeah you have a bad chuck. there is a screw inside the receiver of the ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
dewalt dc926 hammerdrill chuck do not stay lock in reverse my hammer drill works on forward but unlocks on revers chuck should be replaced to parts # 33007575 newer style.
dc926 xrp hammer drill my 18 volt drill does not stay in lock position in reverse. whats the solution in the chuck. ya its a chuck problem wont hold in reverse
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
the chuck came unscrewed from the spindle assembly i was taking out a large screw when the chuck actually came unscrewed from the spindle, i screwed it back on but it seems that there is supposed to ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
drill chuck stok in the thigt possition cant get the bit out ; cant make de chuck to open or close Sometimes this happens when you have a drill bit that slip. Take a pair of channel lock pliers, and ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
Dewalt 954 cordless drill chuck. My socket adapter is stuck in the chuck. It is a borrowed tool and I need to return it in the same shape that i received it. Help. No TWO men can exert enough twisting
Question about DC925B Heavy Duty Xrp 18V Cordless Hammerdrill/Drill/Driver Bare Tool
...drill DeWalt Open the chuck fully. Inside the center bottom of the chuck you will normally find a reverse threaded lock screw that you must first remove. If it is hard to loosen, you may need to heat ...
how to replace chuck Usually: there is a screw inside the chuck with reversal thread. Unscrew it in clockwise direction. Once done, lock bigger allen wrench into chuck and hit the wrench with rubber ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
dewalt dcd970 18v xrp and when i try to unscrew anything the bit comes loose. Can't figure out why? a dewalt dcd970 18v xrp and when i try to unscrew anything the bit comes loose. Can't figure out
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions