Questions & Answers for: dewalt impact driver problems

Dewalt DWo56 18 Volt cordless impact Motor is weak, do these have brushes that could be worn? If so, where are they located? Thanks all drill has brushes. this particular drill you need a motor assy ...

my dewalt impact driver started cutting out as if the battery was deadbut if i pull the battery to either side it seemed fine now its not coming on at all switch could be a problem

...or a problem with the anvil. unfortunately with this impact driver, dewalt only sells the "mechanism" as a whole piece for $88 US. if it is just a worn anvil then it should only cost around $18 ...

dewalt dw056 motor working but no drive. just slips.cant get any drive at all make sure the selector switch is in full rev or full forward and not in mid throw goose the trigger and turn the selector ...

...dewalt. Paid close to $30 for this impact keyless chuck attachment and now have a $30 bit stuck in it. Have called every number dewalt has and nobody has any answers besides that's not covered by the ...

Dewalt 18v impact drill My dewalt impact drill dosent seem to have any grunt anymore even with the batteries fully charged. What can be the problem its only a year old but I use it almost every day. ...

Magnetic Extension for Dewalt Drill Bit I can't change the bit in my magnetic extension. I have the same problem and am thinking of cutting that extension to get it out. A real pice of !@#$$%

dw990 chuck problem? 151359-00 a spring broken perhaps ? http://service.dewalt.nl/Products/ProductParts.aspx?ProductID=6301&BOMRegionID=1 ...

...Dewalt drill/driver DCD771 Type1. When transmission is set 1 the clutch slips in all 15 settings, if you move selector to 2 the clutch seems to work as it should, is there problem with the ...