Questions & Answers for: detent lever

lever in the detent. If I hold the lever just before the detent it works fine. ???? It sounds like the contact point for the lever is either broken, or misaligned. You may need to replace the lever to

...detent click somewhat when doing so. Leave the lever outward and see if the shutter will work. The detent is for appling an closed circuit for the light meter. When the lever is fully pushed back in ...

lever assembly (7E069) to the detent plate. Swing the control lever assembly (7E069) out of the way and remove the two bolts (39129-S2) retaining the detent plate to the transmission extension housing

...lever slides across a spring-loaded detent.  when you move it up or down, the detent falls in a knotch.  there is a ring on the steering column that will release the detent pressure when it ...

...detent lever does not drop into the notch (for whatever reason) the transmission will not stay in nuetral.  The detent levers and springs will be located to the outside of the shift ...

how to install keyed lever over the detent I'm not sure what you mean by "over the detent" http://s7d5.scene7.com/is/content/BDHHI/44593-01

...detent is a notch or notches in a part used to keep a shifter (in this case) at a certain position. Be that an automatic or stick-shift. You can imply that the shift pattern on a stick-shift has ...

...detent lever (4). • The lever assembly which consists of: - The manual shaft (3) - The detent lever (4) The range detection is accomplished by securing the moving contacts to the detent lever. When ...

...detent lever (4). • The lever assembly which consists of: - The manual shaft (3) - The detent lever (4) The range detection is accomplished by securing the moving contacts to the detent lever. When ...

...detent lever (4). • The lever assembly which consists of: - The manual shaft (3) - The detent lever (4) The range detection is accomplished by securing the moving contacts to the detent lever. When ...