Questions & Answers for: denon subwoofer Audio Players & Recorders

Question about D-M31S CD Shelf System

1 Answer

subwoofer what do i need to connect a subwoofer to my Denon UD-M31 what do i need to connect a subwoofer to my Denon UD-M31

Ad

Question about D-M31S CD Shelf System

1 Answer

Denon AVR 486 with a Subwoofer DSW 76 Subwoofer power is on you can here it power up and off. No sound is coming through the subwoofer All of the other speakers are working. This happened before and ...

Ad

...AVR-3000 and want to turn on the B Speakers. I have hooked up my subwoofer to the B connections on the Denon since there is not a subwoofer connection. How do I turn the B speakers on without a ...

denon avr 2308 no subwoofer operation h i have just purchased and set up an avr 2308 amp. My problem is the subwoofer will only put out sound when i use the test tone or the tone used to set up the ...

...of driving the sub directly. The powered (?) subwoofer in your setup would presumably require an RCA cable (whatever length reaches) to feed its amplifier a bass signal from the Denon's Subwoofer

subwoofer is connected correctly (test mode it works fine). The Denon 589 receiver, however, when everything is set up and ready to go, doesnt seem to send any output to it, so there is no base sound.

Question about JPS12 Subwoofer

1 Answer

...instructions shows only 1 cable going from the subwoofer to 1 SW on back of receiver. Get the sub manual out or get a splitter and share the single Denon RCA subwoofer feed with the two Jensen

Question about AVR-1612 5.1 Channels Receiver

1 Answer

my new denon 1612 subwoofer is not working i hv purchased new denon all speaker is working but subwoofer is not working Take it back to the place of purchase, this is a manufacture defect.

Question about AVR-1612 5.1 Channels Receiver

1 Answer

bose 3-2-1 system subwoofer connect to denon avr how to connect the bose subwoofer to a denon avr The subwoofer is not designed to be connected to a non-Bose amplifier.

Question about AVR-1612 5.1 Channels Receiver

1 Answer

denon subwoofer in standby mode no sound at all denon subwoofer in staandby mode Make sure that your sub is turned on in the user menu. Also check your connections. If all checks good, you are covered

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...