Questions & Answers for: dell printer head short

...Dell. My black ink was at about 50% when the black printouts stopped. I tried a new black cartridge but it still won't print black. The paper feeds OK and the printer goes through the motions but the ...

Dell Printer 926 Error 1203 "Print Head Short" I have changed the print cartridges twice, powered on and off nothing works to clear the problem? Error code 1203 means that you have a print head short ...

Dell 926 Printer, Error 1203, (Print Head Short), have changed cartridges twice. Still showing error Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD ...

...the back of the print head. It is not in the slot of the print head or missing. I fixed my banging Dell 810 printer by putting it back in. I had no idea what it was at first. That's all I can tell

...short lines about 1/2 inch each at the lower end of every page - mostly visible in photos, I have a third row at the very bottom of the page. Cannot print reports they look awful. I tried pulling out ...

printer is showing error 1203. i replaced the cartridges recently and then all of a sudden this message pops up. I've taken the cartridges out, but I don't know what else to do. Try this wizard: http:

head problem with these type of ink jets. try unplugging the printer, remove the ink cart and take an alcohol pad or qtip with alcohol and clean the cooper contacts where the ink cartridges go. If the

what is error 1203? Error code 1203 on this printer model is a Shorted print head circuit, this can be the cartridge (most common) or it can be the print head floating ribbon is shorted.

...Dell 926 Printer) is due to a shorted Print head and needing to get the Print head replaced. They did not want to hear about all the clean the cartridges hiney, power both ends of the plug off, etc. ...

...printer head short. I have tried to take the ink cartage out and clean it that did not work I tried unplugging it and that did not work I am trying to find out what to do to fix it. bring it to a ...