...2. Press the CH up/down or VOL right/left button to highlight the desired icon. In Picture menu under VIDEO ADJ. select: NORMAL - Reset all picture adjustments to factory default settings. Good
...picture Menu Viewing Mode does nothing that i can tell The setup menu does not seem to offer any help either. What am i doing wrong? Check for any reset button on the remote of your t.v..........set ...
...picture. I tried changing the aspect on both the TV and the DVR but to no avail. I disconnected all wires from the back of the TV and took the coax cable out of the DVR box and connected it directly ...
picture (black screen) and no sound. The screen is black, so I can't even access the TV's menu nor the settings Checked power outlet (okay) & checked input source (okay). I checked the fuse with a
Question about Magnavox 51MP392H Rear Projection Television
...default but it did not work, anybody know how this can be fixed thank you. All projection TV sets have two very common problems. One is convergence ( 3D/Warped video or dead set) the other is CRT ...
Question about KP-53HS30 53" Rear Projection HDTV-Ready Television
...DEFAULT SETTING Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits ...
...he can make you a set of caps. Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC ...
...he can make you a set of caps. Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC
...Default.aspx he can make you a set of caps. Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series. there is not ...
...Picture and volume locked on one channel. must unplug tv to turn it off Panasonic sets need to be reset to clear the v-chip settings. To do this, put it in standby mode, then press the POWER and ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
