...IP address of the MFP. Click on the "log out" button and then from there you can log back in as the Administrator, password default is 12345678. You will see a list of accounts there which you can ...
Question about bizhub 350 All-In-One Laser Printer
...IP address of the machine in your browser. Once the page comes up, select "log out" and then re-log-in as the Admin. From there you can also set the default file type. It is quite a bit easier than ...
Question about bizhub 350 All-In-One Laser Printer
...default ip address for the Konica Minolta C350 I need the default IP address for the C350. Also how do I change it in the machine? And how can I find it if it was changed? Press the Utility/Counter ...
Question about bizhub 350 All-In-One Laser Printer
...default gateway: 192.168.2.1 PRINTER ip address: 192.168.2.18 subnet: 255.255.255.0 default gateway: 192.168.2.1 thank you for your time and help I guess you mean the c350 is not printing while ...
...IP,default gateway and subnet mask are correct. Dns correct. Can ping the IP address. James open the scangear than u open network setting or u chaeck out DC control and u measuring IC scan with ...
...printing a config page it reports there is no NIC installed. I have reset device back to factory defaults. Is there some other way of finding the MAC / hardware address of the device? are the
Question about bizhub 350 All-In-One Laser Printer
...Windows 7 Go to Konica Minolta web site US I assume down load driver for your machine. GO to Admin Settings PW 00000000 or 12345678 default. Network settings common setting to get IP address ...
Question about bizhub 250 All-In-One Laser Printer
...return you back to your default settings and should remove any locks off of the IP address Try to reset the device and probably you can get a new IP.You can check for the new IP using ...
...IP address. Need default administrator super code to bypass unknown admin password. Mr. Gates, yes there is away to change the pw recommended you get a tech out to do it. Change admin pw not over the ...
Question about Bizhub C300 All-In-One Printer
...printout ip address but default gateway remain 0.0.0.0 Go to Admin mode, then network, TCP/IP, then enter the IP address, subnet and gateway. SET FOR STATIC IP not DHCP!!!!!!! Default admin pw ...
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
261 Questions
256 Questions
