Questions & Answers for: Asrock ddr pc3200

PC3200 (DDR400) for 1 DDR DIMM slot, Max. 1GB I really want to use the DDR 400, but this doesn't make sense. If I use DDR 400 does it have to be both slots but only equal 1GB instead of 2GB? How can I

...pc3200 DDR ram! My mobo is running on 1GB pc3200 RAM very smoothly. But if I add a second DDR memory module of the same type, my pc does not want to start. It shows only error message saying "system ...

...PC3200 1 GB dual-frequency (200-166) Clear Cmos (Not Work) Boot floppy disk (Not Work) AGP card inserted (Not Work) Removed the battery (Not Work) Changed processor (Not Work) Changed branded memory ...

...PC3200 DDR SDRAM Video: ATI Radeon 9200 SE 128 MB BIOS: AMI BIOS version : P2.80 And my problem is i need to put my FSB to 333 and i don't know where i can find it in BIOS ... i just don't find it... ...

...pc3200 ddr (PNY) sticks. All is good but i wanted to add a further 1gb to bring it up to 3gb. My pc will post OK and the mem test is OK but windows won't load ( it gets to the black screen then ...

...PC3200 DDR.512MB. I upgraded it to 1 Gig but I resorted back to 512MB because my programs keep crashing. Is there any suggestions how I can upgrade my memory? thank you and more power. here is a link ...

ddr 400 pc3200 are they compatible? I only get beeps when booted Yes it can be compatible.PC3200 DDR 400 will underclock down to PC2700 in order to match the frequency of the lower end memory card. In

...DDR, SDRAM...front side bus speed 266/200 MHz...you can max out with 2GB's of PC3200...1GB in each slot. I hope this helps. This motherboard does not support for DDR2..This motherboard ONLY ...

...pc3200 ddr 400 i have 2 sticks of 1gb pc3200 ddr 400 memory and a Asrock Motherboards fsb1066 fsb800 i unplug the 2 sticks of 512meg and tryed one stick of the 1gb one and pc did not want to know ...

...DDR PC3200 Unbuffered,NON-ECC memory. Max of 1gib per slot. Sounds like a miss-match on the RAM or a bad stick of RAM pull it back out and see what you get.. if it posts..then get the correct RAM ...