Questions & Answers for: danco install

danco stem install. the spring goes in first then the rubber seat goes on top.put them together first on a small screwdriver,insert on hole push down on rubber into hole it should stay.replace stem in

Where does the spring and rubber piece go when installing a Danco 2S-2H/C stem? http://kitchen-bath.hometownhardware.com/Faucet_parts-ssd70982-p9-l1-t1-Sv-dirasc-PP10.html

...I solve this issue? Not sure I understand your problem; your handle may be incorrectly installed. Danco's instructions for replacing this toilet handle can be found

Danco Universal tank lever - 89450A we have installed it but it will not lift and hold flapper up to flush. Readjust the chain or lifting mechanism associated with the flapper to lever connection.

...install an different shower head...the Danco fixture is 3/8 and most heads are 1/2". I took the instructions with me to the local Lowes store and now, I cannot find them! Can I find the ...

I purchased a Danco Universal Kitchen Sink Spray (10345) and Danco Universal Kitchen Spray Hose (10341) and installed them, but water is leaking from the Kitchen Sink Spray and flooding my cabinet. ...

...install a danco 10472 4z-24h/c hot & cold faucet stem how to install Shut off water supply Open faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. Dress ...

INSTALL A DANCO 9S-4H/C I am using a danco 9s-4h/c stem and there are instructions on how to assemble and install. how are the parts put together? Turn off the water supplying the faucet. Now open the

how do you install a danco 7s-10d caartridge check out this http://www.fixya.com/support/t24874427-way_correct_install_7s_10d_danco_delta#solution-section

installing a danco large acrylic diverter handle for bathtub Is this a question?