Questions & Answers for: danby dish washer

...washer was working fine drained but had some overspill of suds, the kids put regular dish soap in. and now it won't fill at all. thanks jan m. you need to turn the dishwasher upside down so that the ...

...Danby dishwasher. It is about one and one half years old.. The spray arm does not rotate or spray any water. Whats the exact model? check whether the supply is passed over to the motor.... and also ...

danby DDW396W-2 Spray arm won't turn have checked pump, appears to work, spray arm is clean, drain hole clear, lines clear, HELP I have had a similar problem numerous times, a couple of which required

...dish rack. I solved that by putting rust converter on the metal exposed and then covering it with white epoxy putty but this is only a temporary fix as, in time, the entire rack starts to lose its ...

dish washer that senses the level and cuts off the valve, however if the valve is bad then it will never shut off. good thing you were home. i would replace the water valve, that is located behind the

Water pressure loss The top rack will not spin and my dishes are not getting clean enough due to water pressure loss! How can i fix this? The arms that spin can get small pieces of food stuck in the ...

I get major residue and (scum and white spots) on my dishes, along with food being sprayed all over them. They seem to come out more dirty than when I put them in!!! I end up washing dishes in the ...

Danby dishwasher won't drain It is a common fault that the drain fails to work in most machines in a period of time and is the most problematic fault in a dish-washing machine due to large residue

danby counter top dish washer spray bar don't turn the spray bar doesn't turn Remove it and make sure it is clean. They work by the water force going through it, if it's dirty the water can't go ...

...dish washer is attached to the sink and plugged in per the directions. The salt reservoir and rinse agent reservoir are full. The water is turned on to full pressure, and I have turned it on and left ...