Questions & Answers for: dampness sensor

sensor is not working clothes staying wet or damp When using the sensor dry my clothes are staying wet or damp. Do you feel any heat while its on?

my frigidaire dryer will not dry properly( still damp) in automatic mode Depending on how damp they are, it could be normal or you could have a plugged dryer vent. I say that because on these dryers, ...

...dampness sensor looks like two metal strips a few inches long. Try to clean them with a cloth soaked in rubbing alcohol. Dryer sheets can leave a residue on them that causes them to read wrong. Good ...

...sensor for a 12 year old model? Thank you. Easy fix. Get some windex and clean the sensors. Buildup from dryer sheets on them stops them from sensing dampness. When the dampness ain't sensed the ...

...SENSOR STOPS THE DRYER AFTER A FEW (5 OR SO) MINUTES, AND THE CLOTHES ARE STILL DAMP. I MUST SET TIME MANUALLY TO USE DRYER. Get some windex and clean them 2 sensors up good. They might have some ...

dampness sensor strips inside the machine they may be coated with dryer sheet wax or some other mess. Clean them with windex and retry. As the clothes rub against these sensors the dampness causes the

...sensor, thermal leak detector etc. Here I will discuss about thermal leak detection. This technology uses infrared technology to find the damp spots in walls, floors and ceilings. Thermal imaging ...

I have Maytag Atlantis Dryer model MDE7400AYW. The Intellidry sensor seems to be malfunction. The dryer works fine using the timer. But, when I choose the intellidry option, it started out indicating ...

Neptune gas dryer: on sensor cycle (always use), seems to 'get stuck' at about 11 minutes left in cycle. I'll check the load and it's still damp somewhat & is cool to touch (instead of warm). Afte

...dampness of the clothing by delivering a very low powered electrical charge through the drum. The wet laundry conducts the charge telling the sensor that it is still damp. As the clothing dries the ...