Questions & Answers for: Yamaha Road Star damaged key

I bought a repoed 1700 roadstar and i am tring to remove the drivers seat i have tried everthing any tips the key has wheel lock and seat lock ? I have also tried that no luck. help. Put the key in ...

...damaged tumbler, something fell into the key slot, your using the wrong key(what are friends for) or you have a broken contact base.Take the switch off , turn it upside down, and tap it on the work ...

after starting for a few seconds it will shut down and will not start until i turns off key and turn on again. it seems live it loses spark. it also happened a few time when i accelerate fast from ...

I can't get the driver seat off of my 2002 Yamaha Roadstar 1600. Can anyone help, please? Roadstars have a seat lock operated via ignition switch. Insert the key into the ignition switch. Turn the key

I can not get the driver seat off of my 2002 roadstar. Is it cable connected or electronically attached to the ignition.? If you have a custom seat unscrew the back screw. Then insert the key into the

Yamaha Road Star LOST KEYS FOR IGNITION LOST KEYS FOR IGNITION LOST KEY CODE NEED TO KEY Hi, Gregorybrile the answer to this question is way above my pay grade and for this situation, I would call my ...

No electrical power when key turned on Hi, Markstefanat before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more ...

i have a 99 roadstar when i turn the key on nothing happens dash lights dont come on charged battery .i was cranking it everthing went off .could it be a fuse Hi, Anonymous and the usual suspects are:

...wiggle test and check cables with an ohmmeter if necessary. 7. Intermittent short circuit due to damaged wire insulation. 8. Intake air leak. 9. Water, dirt, or rust in the fuel system, fuel pump ...

...be missing and not have the power Hi, Paul and the usual suspects are: 1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary. 2. ...