Questions & Answers for: Toyota Pickup cylinder order

cylinder from the vehicle. Install the new clyinder in reverse order then bleed the air from the system. To bleed have some one else manipulate the clutch pedal. Ensure that the clutch master cylinder

...but it just lost it's power today and it just goes 35 40 MPH and acts like it's running off 2 cylinders....anybody know what to do?? You might want to check your firing order try ...

...and ac to working order. I do not know about the brake light. Usually the brake light has to do with the parking brake being engaged or low fluid level for the master cylinder (DOT 3 Brake

...1991 toy p/u Hi: Your Firing Order is 1----3----4----2 Rotation is Clockwise On Engine Front Cylinder is #1--#2--#3----#4 is the Back Thanks For Using FixYa From: d_hubs Ever need more help let me ...

...firing order is 1,3,4,2. Distributor rotates counterclockwise. Cylinder order when looking at the engine is indeed 1,2,3,4 (left to right). ...

...pickup 4 cylinder. I know the firing order I just don't know where to wire each of them to the distributor, if anyone can help me out that'd be awesome the distributor cap should be ...

...order and spark at all cylinders then the cylinder that did-not change the speed of engine has a compresstion problem.  Bad valves, Piston or rings are bad...   Major engine work and ...

No brake pedal. I replaced the booster and master cylinder. The front brakes bled properly with pumping and then falling to the floor when the fluid was released, however the back brakes would not do ...

...order to shift it. I replaced the slave cylinder and the master cylinder. I have pulled them apart an drained the line and put in new fluid and bled the clutch. Still I have no clutch without pumping ...

what is the firing order for a 1342 on 4 cylinder 123456 on V6 which engine?