...cylinder. To refill the reservior, use DOT 3 brake fluid. The reservoir is located just to the left of the brake fluid reservoir underneath the hood on the driver's side firewall. you can't miss
...cylinder is not firing there were two cracks on one and four of the distributor cover but they were stick with poxy steel glue could the crack still be a problem in loosing current because the the ...
...miss and engine light comes on why thanks You need to read the code, if the engine light comes on. It goes off because the problem is intermittent, but it is still stored in the computer, unless it ...
take gear it will shift fine after a few minutes but now won't take gears at all possible bad slave cylinder on transmission, you do have a hydraulic clutch, have you checked the fluid in it? it might
miss fire? Hello: Sir, the 301 is telling you that you have a mis-fire on cylinder #3, You may have a bad spark plug, or bad wire going to #3 plug or you may have a ignition unit that is not firing #3
...miss-at-idle.html ----------- While stop engine idles like cylinder missing? http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html ------------ Engine Misfire codes ...
Usually answered in minutes!
231 Questions
172 Questions
159 Questions
154 Questions
137 Questions