Questions & Answers for: Dodge Intrepid cylinder miss

missing on two cylinders I live in MN. My 02 intrepid would not start one day when it was below zero. I changed all the plugs. It still would not start. I found that there was a, fuse for the inj. and

Multiple cylinder misfires 2001 Dodge Intrepid I got a dodge intrepid 2001 with a 2.7L engine. While it was running, the check engine light came on. When I put it on the tester, It said that there was

...to the spark plug.The miss fire could be any,of the three.I would replace the spark plugs (all four)and the boots.Then if the miss fire is still there,replace the coil,on number four

...the engine has a miss and I get P300, P306 and P356. I have no Ideal what to check. p300 means multiple cylinder misfire,p306 means #6 cylinder misfire, and p356 means ignition coil ...

...car still miss fires, they then replaced the coil pack.Car still miss fires on passenger side cylinders. The car starts and runs on the driver side cylinders only. What gives with this? its ...

My 94 dodge intrepid shakes when I'm at a stop Sounds like a cylinder or 2 is missing out, replacing plugs and wires could most likely take care of the problem. Please take a moment and rate my answer

I am trying to change the brake lines from the master cylinder, but can't get to the distribution box to remove the bolts...am I missing something? I have a v6 dodge intrepid (2 lines from the ...

miss-at-idle.html -----------           While stop engine idles like cylinder missing? http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine

engine code 307 The code means the number 7 cylinder is miss-firing or lacking in power.Could be an ignition or fuel or mechanical problem.

...miss-at-idle.html ----------- Stumbling and stalling at idle after engine rebuild? http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html ------------ 1999 Ford F-150 ...