Questions & Answers for: Hyundai Elantra cylinder head torque

Question about Hyundai Elantra

2 Answers

...cylinder head. 2.Verify the identification marks on the cylinder head gasket. 3.Install the gasket so that the surface with the identification mark faces toward the cylinder head. 4.Tighten the bolts ...

Ad

...cylinder head torque settings for 1997 I need the cylinder head (and associated parts) torque settings for 1997 1.8L hyundai lantra 1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or ...

Ad

...on a 98 hyundai elantra The cylinder head bolts need to be torqued at 10MM bolts 22 FT-LBS 12mm bolts 26 FT-LBS + 60 degrees and then another 60 degrees.That torque will leave a blown gasket for

...cylinder head bolts for Hyundai Elantra 1.8GLS The cylinder head for my Hyundai Elantra 1.8GLS was removed to replace a broken timing belt and valves. Please provide the required torque on the ...

Question about 1997 Elantra

1 Answer

torquing down the cylinder heads What do you mean when you say +65+65 Generally you torque them all down once in sequence and do it once more to check for good measure to have them all correct

Question about Motor 1996 Elantra

1 Answer

cylinder head torque spec Revised Bulletin This TSB supersedes the Cylinder Head Bolt Torque Specifications previously described in TSB # 96-20-003, TSB # 96-20-003-1 and TSB # 97-20-004. DESCRIPTION:

...cylinder head torque specifications 2004 hyundai elantra Install the cylinder head bolts. Starting at top center, tighten all cylinder head bolts in sequence as shown in illustration, using the ...

Question about 2004 Elantra

1 Answer

...cylinder head bolt tension settings for hyundai lantra j5. Could you email me back on [email protected]. Thanks let me see if i can get some info 4 you. edit REMOVAL 1. Drain the coolant and ...

hyundai getz 1600 torque settings on fly wheel head cylinder cam sprockets crank pulley cam caps See the settings here: http://www.autozmagz.com/search/hyundai+getz+cylinder+head+bolt+torque+settings

...HYUNDAI ELANTRA TORQUE SPECS Install the gasket so that the surface with the identification mark faces toward the cylinder head. Tighten the bolts to the specified torque in the sequence shown

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...