Questions & Answers for: Mitsubishi where is cylinder 1

...cylinder 1 misfire.Check cylinder 1 and replace the faulty cylinder 1 to clear the fault.The spark plugs and the wires connecting to spark plugs also needs to be checked. Keep updated with any more ...

1 WRITE NUMBER 6 AND 5 THAT CIRCLE YOU DREW IS YOUR DISTRIBUTOR PLUGS LOCATION NOW YOU CAN PLACE PLUGS WIRES FROM DISTRIBUTOR TO THE RIGHT SPARK PLUGS LOCATION TO THE CYLINDER BLOCK.LET ME KNOW HOW IT

...cylinder 1). I've put in new spark plugs and wires and the fle injecter is working fine and its still misfiring. Could it be the ignition coil that's cousing only cylinder 1 to misfire? YEP BAD COIL ...

...always be the same side of the motor and the number 1 cylinder. On a V-6 or V-8 bank 2 will be the opposite side of the motor. Inline 4 cylinders, 5 cylinders or 6 cylinders will only have a bank

...galant 3.0L. which set of cylinders is Bank 1, front or rear? bank one is the one facing the rear of the vehicle with the number one cylinder ,, and believe it or not the firing order is 1 2 3 4 5 ...

which cylinder is no. 1 on 96 mitsu galant s 2.4l Cylinder #1 will be on the pulley end of the engine, cylinder 4 on the transmission end.

...cylinder numbers are assigned as 1-3-5 for the right bank and 2-4-6 for the left bank from the front of the engine (timing belt side). This engine is fired in the order of 1, 2, 3, 4, 5 and 6 ...

cylinder at the front of the engine is #1. Followed by #'s 2, 3, and 4 all in order. The firing order is 1-3-4-2, but that is only the order that they fire in, not there location. So #2 is the 2nd

what causes my 2001 mitsubishi GDI car to be firing only on number 2 and 3 cylinders Number 1 and 4 cylinders not firing. 2001 mitsubishi lancer gdi 4g15 engine drive by wire Check to see if #1 &4

...right side of the car as you drive). Cylinder 1 is the left side nearest to you, Cylinder 2 is the right side nearest to you. 3 is middle left, 4 is middle right, 5 is back left and 6 is back