...crt While I'm working on my computer, the monitor will go black for no apparent reason, what will cause this and how can I fix it? just check the power cable from the monitor is connected properly or ...
...CRT monitors. NOTE: To reset the monitor to factory settings: Turn off the monitor by pressing the POWER button. Press and hold the plus (+) button and then Whith the Plus (+) button pressed, press ...
...monitor. A 15" CRT just isn't worth fixing these days. The little buttons beneath the monitor, unfortunately, do nothing for color adjustment - just brightness, contrast, and the usual ...
...CRT monitor which starts flickering and blacks out every 5mins or less than that, i have to hit it with the right amount of force on the sides or on the back to make the picture come back. This ...
...CRT mx70 HP monitor. Sounds like the CRT is starting to go bad cause its taking longer and longer for it to boot up. CRT's aren't available now so a new monitor would be the only option. Yup, new ...
Question about Pavilion MX70 17" CRT Monitor
...a new bulb be put into the monitor? To replace the crt picture tube will be an expensive exercise as they are not bulbs as such but the entire screen needs to be replaced as they are a complete
Question about Pavilion MX75 17" CRT Monitor
...monitor flickers on and off when it is plugged in. Can barely see the screen! 17-inch CRT? Ask your friends -- one of them probably has a "surplus" 17-inch CRT that they will _love_ to give-away to ...
Question about Pavilion MX70 17" CRT Monitor
...CRT, there are three color guns, Red, Green, Blue. They work together to produce all colors in the spectrum. If the monitor goes all one color, it generally means at least one color gun is failing. ...
...CRT) can develope a short circuit in the neck area of the tube that will cause this. I suggest that you remove the plastic cover of the monitor, and tap on the neck of the cathode ray tube with the ...
Question about Pavilion MX50 15" CRT Monitor
problem is more than likely caused by the flyback transformer, this generates the high voltage to the crt screen, when this part fails the protection circuit activates causing the monitor to shut down
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,195 Questions
1,096 Questions
608 Questions