Questions & Answers for: crt discharge

Ad

discharge to CRT ground strap........................ Note: Part list.....257805 or ASTI 2078 xformer and 237470 horiz output xistor ( Do not use generic) transistor must be first quality, no seconds

Ad

Question about iMac Desktop

1 Answer

...CRT discharge tool (if you do not have a discharge tool you can use a insulated srewdriver attached to a wire lead with alligator clips on both ends) Use one hand keeping the other behind your back. ...

Ad

...discharge them slowly when powered down, if this is an older CRT TV please take note that the tube will hold it's charge for a long time but you should not need to go anywhere near this to while ...

Question about FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

...discharge by inserting s screew driver blade with a wire and crock clip attached clip to braiding on crt bulb> if a fuse is blow find out why before replacing mighy be faulty diode or power ...

Question about FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

...part to discharge crt safely then remove anode cap from crt. Any ectrical wires,should do find.Just make sure one side of the wire is grounded in a metal frame or the currents will go through

...discharge the CRT(picture tube) get the posion out.Take the tv back cover off.Take video board that connected to the CRT(picture tube) out.Plug it in,so u have a live current to the CRT(picture ...

Lxi tv take apart is the CRT discharged model 580 42058290 Dhhs code. GX I want to through out tv but save some componets and I'm not sure if CRT is automatically discharged or do I have to do it ...

Question about KP-51WS520 51" Rear Projection HDTV-Ready Television

1 Answer

when working on a rear projection TV, Does the flyback needs to be discharged same as an CRT? NEITHER usually need to be discharged, the crt's are sealed at the anode area. SD TECH

...CRT even though the set is switched off, and will retain for a long time.  You must have to discharge the final anode before remove the anode cap.  To do this, connect ...

...discharge crt with screw driver This requires technical skills. Basically to discharge a crt you need a long screwdriver and a 2 wired side to side alligator clips. Unplug the set from outlet for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6182 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...