Questions & Answers for: Sansui crt board

...CRT in your flat panel set.. What you might have is your color setting to high causing the bleed or your T-con board is bad , but first turn down your color if that does not do it have a tech replace ...

my sansui tv sound comes on and off Hi, Power supply board have problems,just not dead yet.Replaced the power supply board,will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a

...anything? what can i do hi, may be ur tvs picture tube base ( crt socket) have some problem. u can see socket on the base board on the end of picture tube neck. replace the same and then try again. ...

...of the times just require resoldering for FBT-for stronger highvoltage output for the Flyback transformer.The video board CRT-tv tube sockets pins in the connected them both,will solved the

...CRT circuit board ) at some soldering joints crack develops....then due to loose contact picture becomes small in size or abnormal width, or rolls etc ...........when we hit that lightly then those ...

...CRT video board that is connected to the CRT- picture tube have cold soldering joints around it video board connections sockets,require resoldering the socket joints connections between the CRT video ...

...to check. Clean the EHT, the HT wires and the CRT anode on the tube. The pop might be the spark and guns seem to work with a bias when this happens, check on the CRT board on the base of the

my sansui dtv2760 is turning green and purple Check its video output board for any loose solder terminals. This board can be located at the back of the picture tube, directly plugged on to it. Blue ...

green colour missing Green colour missing Hey check crt board for loose soldering ,check main board where the wires lead to the crt board ,check video/chroma circuit for loose soldering

Hi i have got sansui TV model sv-4200lcd with no picture but oudio is fine Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to ...