Questions & Answers for: crown ce1000 amplifier faulting

...there is a problem detected in the final output stage of the amp. This amp will require service. Crown amps are not teh most straightforward designs and should not be repaired by an inexperienced ...

...of the fans are coming on but i assumed its cause the cover is off and its pretty cold in my shop. crown hasnt given me a straight answer and alays comes back to the relays c-10335-5. and to make ...

...Crown CE1000 power amplifier. I turned it on the other day and I seen a bright flash inside of it. Now the fault lights are blinking and it won't work. Is there something that I can look for or is it ...

The fault lights are blinking. No audio The fault lights are blinking. No audio output. How can we troublshoot? Have read the fault conditions, but not sure how to determine which condition it is. If ...

Upon " power on" "fault" lights blink then power unit off. If you're happy to have a look inside the amplifier you can disconnect it from the mains (important bit), then take the lid off and have a ...

channel 2 stuck on fault. plays for about 5min then fault light comes on, so now channel 2 does'nt play when fault comes on output stages faulty

...crown ce1000 -should the fan come on later when the amp heats up? This is a very sophisticated amp and it will turn the fan on at various speeds when it feels the need for it. Of course, if it's ...

CROWN CE1000- slips into fault immediately after connection CROWN CE1000- powers up fine, goes through fault protection testing fine, but unit clips and slips into fault protection (cycling) ...

Crown CH1 Amplifier (as soon as you put the on/off switch to the ON position, the CLIP light blinks a couple times and the FAULT lights blink until a loud "CLICK" sound is heard and the unit turns off

...crown ce1000 on a laptop You can't diagnose the amp with a PC. That's not what the RJ11 jack is for. Have a read of your instruction manual (or download a copy from the Crown web site, and then read ...