Questions & Answers for: Dodge D150 cross fire exe

318 not firing I'v changed the plugs and since then it will not fire at all. What should i look for? Are the spark plugs gapped properly? Should be set at .035 inch

1987 dodge d 150 not firing my battery also fell of and unpluged my lead wire and wont fire have tryed everything can someone help me change the battery cables,use a wire brush and clean the battery ...

firing order on a slant six on distributor cap dodge truck plugs fell off distributor forgot where they went 1,5,3,6,4,2 Cylinder one is up front. 1984 dodge ram d150 slant 6 firing order and all ...

fireing order for dodge 3.8 6 cilinder For the 1984 Dodge D150: There was a 3.7L In-Line (Straight) 6-Cylinder but not a 3.8L 6-Cylinder For the 3.7L In-Line 6-Cylinder: Firing Order: 1-5-3-6-2-4 ...

no voltage at coil Check the ignition resistor mounted on the firewall. It will be white in color with two terminals. One terminal coming in from ignition switch and the other going to the coil. Check

i have a 1975 dodge D100 miss fireing i have a 1975 dodge D100 with a 318 v8 motor and would you know the fireing order cuz the engine wont start it will fire but wont run The correct firing order for

what is the firing order on a 89 dodge v6 3.9 liter and where is number one on the roter For the 1988 thru 1996 Dodge 3.9L (238 cubic inch) V6: Firing Order: 1 - 6 - 5 - 4 - 3 - 2 Cylinders: ...

firing order digram showing distributor cap and plug wire placement for 1987 dodge d150 with a 5.2L V8 Here is a firing order diagram for that vehicle and engine, and let me know if you require any ...

...cleaned all conections and put back on...still no luck. Turned the key to the on position and crossed the starter and fired instantly. I let her run for a while and shut her off, then I tried

...he might have mixed up a few wires coming from the disturber.Any thoughts...?? well if they are crossed it is bad. that could cause premature detonation in the intake or after fire in the