Question about World Class 38154550 (15-45x50 mm)
cross hairs are tilted to right while scope is straight after sighting my rifle in at the range then going to the hunting camp I shoot three rounds to make sure it was still good. The next morning I ...
Question about RIMFIRE SCOPES BLACK GLOSS FINISHPower: 4 x 15 / Reticle: Crosshair
I need the cross hair adjusting screw cover Go to a gunshop that deals in tasco scopes and they should be able to see you right.
Question about Target/Varmint 6-24x42mm Rifle Scope Mil Dot Reticle
crosshairs look like an x instead of a cross got back from ABO repair for stripped tube, where eye bell fits on. they said they changed the tube. I shot about 50 rds with it when problem developed ...
Question about PH39X40D 3-9x40 Pronghorn Riflescope - Black
instruction for my scope.Its a tasco pronghorn 3x9x40 with adjustable yardage and has two elavation cross hairs,I have had it for many years and it works perfect,but I have never understood how to use
Question about 3-9x32 .22 Riflescope W/ Rings, Black Matte
i have a 3-12 by 40 rifle scope made by tasco i dont have thewaranty paper work any more and the cross hairs wont adjust any more what do i do i dont realy understand what you mean by "the cross hairs
Question about Target/Varmint 6-24x42mm Rifle Scope Mil Dot Reticle
cross hairs turn when adjusting power Sounds like somebody took your scope apart and forgot something. You can remove the rear of the scope, but you might want to send it back to the factory. Some ...
Question about Target/Varmint 6-24x42mm Rifle Scope Mil Dot Reticle
cross hairs wont move when trying to ajust The cross hairs don't actually move when you adjust a scope, instead, they are contained within what is called the erector tube. When you adjust your scope ...
Question about Target/Varmint 6-24x42mm Rifle Scope Mil Dot Reticle
...screw counterclockwise. To shift left, turn windage screw clockwise. If you raise the horizontal cross hair you will lower the point of impact of the bullet. If you move the vertical cross hair to ...
My cross hairs do not move when i adjust my sights. i bought a laser bore sighter and the laser points in the same exact spot no matter how far i turn my adjustments nor do my cross hairs move. This ...
...screw counterclockwise. To shift left, turn windage screw clockwise. If you raise the horizontal cross hair you will lower the point of impact of the bullet. If you move the vertical cross hair to ...
Usually answered in minutes!
85 Questions
80 Questions
41 Questions