Questions & Answers for: Oldsmobile Intrigue crank sensors

crank position sensor location i have a 2000 olds intrigue and i need to replace the crank position sensor and i cannot locate it can anyone help me thanks you will need to remove the starter to gain ...

where is the crankshaft position sensor located on a 2000 intrigu 321 Should be located around 11:00 on front of engine at crank pully. the crank positioning sensor is located above the starter and ...

crank sensor 1999 intrigue does it take special crank sensor 1999 intrigue does it take special damper removal tool? Not on the 3.5l LX5. The crank sensor on that engine is near the starter.

crank sensors that there's no way to put here which resistance reading is correct). Then check the resistance of the CKP sensor by disconnecting the Sensor Bnd measuring resistance of the sensor.

olds starts but it takes 7 or 8 cranks befor it starts and check engine light is on seems like a air problem ? have the code pulled from the computer this may tell you were to start to diagnois your ...

Don't see the crank position sensor In my 1990 Dodge Dakota 4X4 I have my starter off. I want to replace my crank position sensor, but haven't found where it's at. have a ...

car willl turn over but wont crank it will turn over but wont crank and there is a wire coming from the coil that isnt hooked up and i cant find out where to plug it in at Which engine do you have ...

where is the crank sensor located need to no where the crank sensor located crank sensor should be at the bottom on front of motor to side of the crank with the pulley and belts on it have a plug and ...

crank sensor Where is the crank sensor what motor?the 3.8 is behind the crank pulley the 3.1 is on the block between the engine and trans

symptom of bad crankshaft sensor on 2000 yukon denali it skips when driving on hiway A crank sensor will usually fail and set a trouble code in the computer. Once the engine starts the ignition gets a