...plug. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked. Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with ...
...plug. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked. Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with ...
...cedia from start Here are some things thats could cause a no start, a bad fuel pump, a bad crank sensor or a can sensor, these are the most common, the coil would be the first thing to
...you are using a generic OBD code reader to get this code, there may be another "vehicle specific" crankshaft position sensor code that the code reader does not have a definition for and is
...the engine speed sensor. need some help please! This code will most likely be caused by the crankshaft sensor or wiring. It is for the engine speed input circuit which gets its info from the ...
...no spark there is a lot of player and alot of question before the solution here are the components, Crank sensor, ,and the ECM.The cranksensor is a hall effect sensor it provides the ECM of the RPM, ...
were is the crank sensor located back of the engine front i think in line with crank just above the sump rail
wont start It cranks but wont start. Replace plugs battery. And fuel is getting to the engine test for spark. could be a bad crank sensor or a bad coil
Question about 2003 Lancer
2003 lancer crank not start new plug new coil new crank sensor no spark replace coil crank sensor no spark Does this model have an ignition module? If so, they can be tested at most parts stores.
how to change the crank sensor on a mitsubishi lancer can removing and fixing the same sensor damage it...? there is not fixing of sensors just replace it .
Usually answered in minutes!
997 Questions
654 Questions
213 Questions
209 Questions
136 Questions
