Questions & Answers for: Chevrolet Tahoe crank sensors

Question about 1999 Tahoe

3 Answers

...sensors, air flow sensor, battery, distributor, plugs are showing yellow spark, these plugs are spit fire plugs. At wits end. check the crank sensor. no signal from the crank sensor causes a no spark ...

Ad

2002 taheo wont start turns over fine like some kill switch has e avtivated Replace crank sensor Have you made sure the timing belt hasnt broke or checked the crank sensor

Ad

Question about 2005 Tahoe

1 Answer

Where do I replace the crank sensor for a 2001 tahoe? The crank sensor is always near the front of the engine usually using the crankshaft pulley on the front or sometimes the crankshaft itself.

...it was driving fine i have no check engine light on, however i did notice when i would try to crank it up it wouldnt turn over immediatly then the second time it would turn over & crank

Question about 1999 Tahoe

1 Answer

...crank sensor, ran 1 time, no start next day, pulling same codes po336 and po339. Exchanged sensor thinking it was defective. Installed, no start again Recheck your connections.  May be a ...

I have my 2002 tahoe estarea only and will not start no spark at the spark plugs anyone knows that can be crank sensor controls the spark along with cam sensor....try crank sensor first

Question about 1999 Tahoe

1 Answer

crank and cam sensors located? the 5.3 and 6.0 are famous for bad crank sensor. never a problem with cam sensor. the crank sensor is located behind the starter. you need to remove starter to get to it

...not even turn over, when the weather is wet, it will sometimes fire up. I recently replaced the Crank position sensor, but the "no crank" has been an issue for some time, it started out theat I ...

Question about 1999 Tahoe

1 Answer

what is crank sensor will not start The crank sensor is located at the bottom end of the engine it counts the rotation of the crank in relevance to the camshaft sensor, it relates to the timing of the

1997 Tahoe it crank but won't start replaced the crankshaft position sensor still no start I drove it to work an back home an got in it to start an crank but no start Why did you replace the crank ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...