Questions & Answers for: cracked plastic door microwave

...door . That held on by little plastic clips that are molded right on the suround and easy to break, so take a small screw driver(of course the ovens unplugged by now) and start at one end and start ...

...plastic outter door frame has cracked and broken off. Can anyone please talk me through taking the door off so that I can replace the outer door frame. I've found the frame from several parts places ...

...cracked How do you change the front panel of the microwave where the door handle is I already have the plastic piece Around the inside door there should be a plastic piece of trim right around the ...

...plastic air difuser located just above the door has cracked and come loose. Has Sear's recalled this microwave or has anyone else experienced problems similar to mine? If this is and Over the Range ...

Plastic door is cracked and needs replacement. Do not use a microwave with a cracked door as it could be emitting dangerous microwaves. Sadly the cost of replacing the door would be more that the cost

cracked plastic door frame on Whirlpool microwave? The plastic frame on the door of our Whirlpool MH1150XMT0 microwave has a stress crack under the handle and running from the middle screw hole on the

plastic hold glass in door has cracked and broken find out how much new door is compared with new m/wave.

...MH1160XSD0 model is crack can this be replaced? Yes, the door panel comes off easy (3 screws on the side). Mine was cracked so I ordered a new one. Not the vent above it is cracked. Cheap

...plastic RF shield (or door gasket). This is the most tricky part, and if you are not experienced, you may break that plastic since it is rather brittle. And if you do break it or crack it, then it ...

...plastic on the side of the door has cracked. In the parts list I find a door panel for about $65 and a door frame for $135. It's hard to tell from pictures if the plastic edge if included in the ...