how to fix a cracked cymbal You really can't repair a cymbol thats cracked. Any soldering or repair will change the sound. I would suggest drilling a small hole at the end of the crack. this will at ...
I have two cracks behind the bridge (parallel from the high/low E). Both run from the bridge to the bottom. What should I do? Lefty LXM1 Take it to a Luthier for a repair estimate. They can often ...
Question about TH-15A Active DJ Powered THUMP Speaker Stand and Cable Set TH-15ASET1
My mackie thump amp will start to have a loud cracking sound. The cracking goes away if I have the input line unplugged from the speaker but with it plugged in it has the cracking sound and it does ...
solder connection where power jack is attached to the circuit board. SOmetimes the circuit board is cracked or solder broken. If board is cracked, jumpers need to be soldlered on to bridge the crack
...the head to see if that would help but it still has this awful thwunk sound. It probably has a crack. Do like is done in some aircraft quality control things looking for cracks: Make a solution, ...
Question about Ctk 496 Electronic Keyboard with 61 Keys and Singalong Capability
casio ctk-501 the power input cracked on the curcit board i did a bypass wiring over the crack and it got power works again but only till i start playing a bunch of keys then the sound gets stuck and ...
Question about Ctk 496 Electronic Keyboard with 61 Keys and Singalong Capability
Recently I discovered a long fine crack in the soundboard of my 5'7" grand piano. Is there a way to repair the crack? Recently I discovered a long fine crack in the soundboard of my ...
Question about Ctk 496 Electronic Keyboard with 61 Keys and Singalong Capability
I have a mackie thump that will not turn on. I was wondering why this is? I have bought a new adapter and the power cord is fine Hello, Check power supply Mosfet's for cracked pins, check power supply
acoustic top crack Your best bet is to send it back to Martin. Normally the top can be repaired if it's a linier crack along the grain line, but to do the job correctly the top will need to be ...
Crack in electric guitar body A guy gave me some cash, a ME301 electric guitar made by First Act and a little 10W Dinosaur amplifier for some RC airplane equipment I wanted to sell. I was doing a ...
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions